SIGALARM
5224 W State Rd. 46 PMB 405
Sanford FL 32771
info@sigalarminc.com
Phone: (407) 321-0722
Fax:(407) 321-0723
Sigalarm manufactures high voltage power line WARNING
SYSTEMS (Proximity Alarms) which save lives.
Our high voltage power
line encroachment and warning systems including
(proximity alarms, range control warning devices,
and range limiting devices). We also are a Hirtzer
Insulated Link Premier dealer with over 20 years of
experience.
OSHA has published online at
http://www.osha.gov/doc/cranesreg.pdf
the new crane and derricks standard. This regulation
recognizes that overhead high voltage power lines
represent a potential hazard to both operators and
ground personnel working near equipment with booms,
mast, or any other types of extensions that have the
capability of reaching these high voltage power
lines. The effective date for this regulation will
be around November 10th of 2010.
Virtually all fatal electrocutions are a direct
result of equipment being unintentionally brought
into contact with a high voltage power line. We
believe that most of these accidents could have been
avoided by additional operator training and the
installation and proper use of our products. Our
line of proximity alarms, range control warning, and
range limiting devices will assist operators who may
become distracted or unable to see the dangerous
overhead high voltage power lines. Our products are
to be used as a tool to increase operator awareness.
Please read through our site to learn more about our
complete line of products, including proximity
alarms, range control warning devices, range
limiting devices, insulated links, and line contact
alarms which could potentially prevent at least 20%
of the reported fatalities by informing workers that
the machine chassis has become energized.
Our products will pay for themselves in less than 2
months compared to the expense of using a dedicated
spotter which is now 1 of the 5 options required in
the new crane and derricks regulation.
Thank you for visiting.
Allied Safety Systems, Inc. proudly manufactures our
complete line of products in the USA.
NEW OSHA STANDARDS PUBLISHED
Sigalarm High Voltage Power Line Proximity Alarm
Product Main Features:
Solid State
On demand status monitor
Audible and visual alarms
Single hardwire sensor
Single relay output
AUTO SHUTDOWN and range control
ASE 2200L - Sigalarm High Voltage Power Line Proximity Alarm
Product Main Features:
Microprocessor control
Continuous status monitor
Audible, Visual, and Voice messaging
Dual hardwire sensor
Triple relay output
AUTO SHUTDOWN and range control
WPA - Sigalarm High Voltage Power Line Proximity Alarm
Product Main Features:
Microprocessor control
Continuous status monitor
Audible, Visual, and Voice messaging
1 or 4 wireless sensors
Dual relay output
AUTO SHUTDOWN and range control
ASE 1200 - Line Contact Alarm
Product Main Features:
Line contact alarm
Microprocessor controlled
Voice Messages
Vehicle AC voltage monitor
ASE 1200 is a line contact alarm which means it will alarm AFTER accident to let people know NOT to touch vehicle since it is energized. OSHA asked for this
Hirtzer Insulator
Product Main Features:
Insulated links
RF protection
½ ton to 120 ton range
1KV to 50+KV protection
Installation options
product
is sold as an “insulator” and normally installed on a crane load line to prevent current from flowing down cable wire to workers on the ground after an accident has occurred. They are load rated and sized accordingly to load and voltage protection desired example “10ton 50KV insulated link”
